STM32F37 Standard Peripheral bibliotheek  1.0
ST Microelectronics bibliotheek documentatie voor de STM32F37 Standard Peripheral Library
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
Interrupts and flags management functions

Interrupts and flags management functions. More...

Functions

void RTC_ITConfig (uint32_t RTC_IT, FunctionalState NewState)
 Enables or disables the specified RTC interrupts. More...
 
FlagStatus RTC_GetFlagStatus (uint32_t RTC_FLAG)
 Checks whether the specified RTC flag is set or not. More...
 
void RTC_ClearFlag (uint32_t RTC_FLAG)
 Clears the RTC's pending flags. More...
 
ITStatus RTC_GetITStatus (uint32_t RTC_IT)
 Checks whether the specified RTC interrupt has occurred or not. More...
 
void RTC_ClearITPendingBit (uint32_t RTC_IT)
 Clears the RTC's interrupt pending bits. More...
 

Detailed Description

Interrupts and flags management functions.

 ===============================================================================
            ##### Interrupts and flags management functions #####
 ===============================================================================  
    [..] All RTC interrupts are connected to the EXTI controller.
 
         (+) To enable the RTC Alarm interrupt, the following sequence is required:
             (++) Configure and enable the EXTI Line 17 in interrupt mode and select 
                  the rising edge sensitivity using the EXTI_Init() function.
             (++) Configure and enable the RTC_Alarm IRQ channel in the NVIC using 
                  the NVIC_Init() function.
             (++) Configure the RTC to generate RTC alarms (Alarm A and/or Alarm B) 
                  using the RTC_SetAlarm() and RTC_AlarmCmd() functions.

         (+) To enable the RTC Wakeup interrupt, the following sequence is required:
             (++) Configure and enable the EXTI Line 20 in interrupt mode and select 
                  the rising edge sensitivity using the EXTI_Init() function.
             (++) Configure and enable the RTC_WKUP IRQ channel in the NVIC using 
                  the NVIC_Init() function.
             (++) Configure the RTC to generate the RTC wakeup timer event using the 
                  RTC_WakeUpClockConfig(), RTC_SetWakeUpCounter() and RTC_WakeUpCmd() 
                  functions.

         (+) To enable the RTC Tamper interrupt, the following sequence is required:
             (++) Configure and enable the EXTI Line 19 in interrupt mode and select 
                  the rising edge sensitivity using the EXTI_Init() function.
             (++) Configure and enable the TAMP_STAMP IRQ channel in the NVIC using 
                  the NVIC_Init() function.
             (++) Configure the RTC to detect the RTC tamper event using the 
                  RTC_TamperTriggerConfig() and RTC_TamperCmd() functions.

         (+) To enable the RTC TimeStamp interrupt, the following sequence is required:
             (++) Configure and enable the EXTI Line 19 in interrupt mode and select 
                  the rising edge sensitivity using the EXTI_Init() function.
             (++) Configure and enable the TAMP_STAMP IRQ channel in the NVIC using 
                  the NVIC_Init() function.
             (++) Configure the RTC to detect the RTC time-stamp event using the 
                  RTC_TimeStampCmd() function.

Function Documentation

void RTC_ClearFlag ( uint32_t  RTC_FLAG)

Clears the RTC's pending flags.

Parameters
RTC_FLAG,:specifies the RTC flag to clear. This parameter can be any combination of the following values:
  • RTC_FLAG_TAMP3F: Tamper 3 event flag
  • RTC_FLAG_TAMP2F: Tamper 2 event flag
  • RTC_FLAG_TAMP1F: Tamper 1 event flag
  • RTC_FLAG_TSOVF: Time Stamp Overflow flag
  • RTC_FLAG_TSF: Time Stamp event flag
  • RTC_FLAG_WUTF: WakeUp Timer flag
  • RTC_FLAG_ALRBF: Alarm B flag
  • RTC_FLAG_ALRAF: Alarm A flag
  • RTC_FLAG_RSF: Registers Synchronized flag
Return values
None
void RTC_ClearITPendingBit ( uint32_t  RTC_IT)

Clears the RTC's interrupt pending bits.

Parameters
RTC_IT,:specifies the RTC interrupt pending bit to clear. This parameter can be any combination of the following values:
  • RTC_IT_TS: Time Stamp interrupt
  • RTC_IT_WUT: WakeUp Timer interrupt
  • RTC_IT_ALRB: Alarm B interrupt
  • RTC_IT_ALRA: Alarm A interrupt
  • RTC_IT_TAMP1: Tamper1 event interrupt
  • RTC_IT_TAMP2: Tamper2 event interrupt
  • RTC_IT_TAMP3: Tamper3 event interrupt
Return values
None
FlagStatus RTC_GetFlagStatus ( uint32_t  RTC_FLAG)

Checks whether the specified RTC flag is set or not.

Parameters
RTC_FLAG,:specifies the flag to check. This parameter can be one of the following values:
  • RTC_FLAG_RECALPF: RECALPF event flag
  • RTC_FLAG_TAMP3F: Tamper 3 event flag
  • RTC_FLAG_TAMP2F: Tamper 2 event flag
  • RTC_FLAG_TAMP1F: Tamper 1 event flag
  • RTC_FLAG_TSOVF: Time Stamp OverFlow flag
  • RTC_FLAG_TSF: Time Stamp event flag
  • RTC_FLAG_WUTF: WakeUp Timer flag
  • RTC_FLAG_ALRBF: Alarm B flag
  • RTC_FLAG_ALRAF: Alarm A flag
  • RTC_FLAG_INITF: Initialization mode flag
  • RTC_FLAG_RSF: Registers Synchronized flag
  • RTC_FLAG_INITS: Registers Configured flag : Shift operation pending flag.
  • RTC_FLAG_WUTWF: WakeUp Timer Write flag
  • RTC_FLAG_ALRBWF: Alarm B Write flag
  • RTC_FLAG_ALRAWF: Alarm A write flag
Return values
Thenew state of RTC_FLAG (SET or RESET).
ITStatus RTC_GetITStatus ( uint32_t  RTC_IT)

Checks whether the specified RTC interrupt has occurred or not.

Parameters
RTC_IT,:specifies the RTC interrupt source to check. This parameter can be one of the following values:
  • RTC_IT_TS: Time Stamp interrupt
  • RTC_IT_WUT: WakeUp Timer interrupt
  • RTC_IT_ALRB: Alarm B interrupt
  • RTC_IT_ALRA: Alarm A interrupt
  • RTC_IT_TAMP1: Tamper1 event interrupt
  • RTC_IT_TAMP2: Tamper2 event interrupt
  • RTC_IT_TAMP3: Tamper3 event interrupt
Return values
Thenew state of RTC_IT (SET or RESET).
void RTC_ITConfig ( uint32_t  RTC_IT,
FunctionalState  NewState 
)

Enables or disables the specified RTC interrupts.

Parameters
RTC_IT,:specifies the RTC interrupt sources to be enabled or disabled. This parameter can be any combination of the following values:
  • RTC_IT_TS: Time Stamp interrupt mask
  • RTC_IT_WUT: WakeUp Timer interrupt mask
  • RTC_IT_ALRB: Alarm B interrupt mask
  • RTC_IT_ALRA: Alarm A interrupt mask
  • RTC_IT_TAMP: Tamper event interrupt mask
NewState,:new state of the specified RTC interrupts. This parameter can be: ENABLE or DISABLE.
Return values
None