STM32F4 Standard Peripheral bibliotheek  1.0
ST Microelectronics bibliotheek documentatie voor de STM32F4 Standard Peripheral Library
 All Data Structures Files Functions Variables Enumerations Enumerator Groups
stm32f4xx_dbgmcu.h File Reference

This file contains all the functions prototypes for the DBGMCU firmware library. More...

#include "stm32f4xx.h"

Go to the source code of this file.

Macros

#define DBGMCU_SLEEP   ((uint32_t)0x00000001)
 
#define DBGMCU_STOP   ((uint32_t)0x00000002)
 
#define DBGMCU_STANDBY   ((uint32_t)0x00000004)
 
#define IS_DBGMCU_PERIPH(PERIPH)   ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
 
#define DBGMCU_TIM2_STOP   ((uint32_t)0x00000001)
 
#define DBGMCU_TIM3_STOP   ((uint32_t)0x00000002)
 
#define DBGMCU_TIM4_STOP   ((uint32_t)0x00000004)
 
#define DBGMCU_TIM5_STOP   ((uint32_t)0x00000008)
 
#define DBGMCU_TIM6_STOP   ((uint32_t)0x00000010)
 
#define DBGMCU_TIM7_STOP   ((uint32_t)0x00000020)
 
#define DBGMCU_TIM12_STOP   ((uint32_t)0x00000040)
 
#define DBGMCU_TIM13_STOP   ((uint32_t)0x00000080)
 
#define DBGMCU_TIM14_STOP   ((uint32_t)0x00000100)
 
#define DBGMCU_RTC_STOP   ((uint32_t)0x00000400)
 
#define DBGMCU_WWDG_STOP   ((uint32_t)0x00000800)
 
#define DBGMCU_IWDG_STOP   ((uint32_t)0x00001000)
 
#define DBGMCU_I2C1_SMBUS_TIMEOUT   ((uint32_t)0x00200000)
 
#define DBGMCU_I2C2_SMBUS_TIMEOUT   ((uint32_t)0x00400000)
 
#define DBGMCU_I2C3_SMBUS_TIMEOUT   ((uint32_t)0x00800000)
 
#define DBGMCU_CAN1_STOP   ((uint32_t)0x02000000)
 
#define DBGMCU_CAN2_STOP   ((uint32_t)0x04000000)
 
#define IS_DBGMCU_APB1PERIPH(PERIPH)   ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00))
 
#define DBGMCU_TIM1_STOP   ((uint32_t)0x00000001)
 
#define DBGMCU_TIM8_STOP   ((uint32_t)0x00000002)
 
#define DBGMCU_TIM9_STOP   ((uint32_t)0x00010000)
 
#define DBGMCU_TIM10_STOP   ((uint32_t)0x00020000)
 
#define DBGMCU_TIM11_STOP   ((uint32_t)0x00040000)
 
#define IS_DBGMCU_APB2PERIPH(PERIPH)   ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00))
 

Functions

uint32_t DBGMCU_GetREVID (void)
 Returns the device revision identifier. More...
 
uint32_t DBGMCU_GetDEVID (void)
 Returns the device identifier. More...
 
void DBGMCU_Config (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures low power mode behavior when the MCU is in Debug mode. More...
 
void DBGMCU_APB1PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB1 peripheral behavior when the MCU is in Debug mode. More...
 
void DBGMCU_APB2PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB2 peripheral behavior when the MCU is in Debug mode. More...
 

Detailed Description

This file contains all the functions prototypes for the DBGMCU firmware library.

Author
MCD Application Team
Version
V1.0.2
Date
05-March-2012
Attention

© COPYRIGHT 2012 STMicroelectronics

Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:

   http://www.st.com/software_license_agreement_liberty_v2

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.