Shift control synchronisation functions

Shift control synchronisation functions. More...

Functions
ErrorStatus	RTC_SynchroShiftConfig (uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS)
	Configures the Synchronization Shift Control Settings. More...

Detailed Description

Shift control synchronisation functions.

 ===============================================================================
            ##### Shift control synchronisation functions #####
 ===============================================================================  

Function Documentation

ErrorStatus RTC_SynchroShiftConfig	(	uint32_t	RTC_ShiftAdd1S,
		uint32_t	RTC_ShiftSubFS
	)

Configures the Synchronization Shift Control Settings.

Note

When REFCKON is set, firmware must not write to Shift control register

Parameters

RTC_ShiftAdd1S,:	Select to add or not 1 second to the time Calendar. This parameter can be one of the following values : RTC_ShiftAdd1S_Set: Add one second to the clock calendar. RTC_ShiftAdd1S_Reset: No effect.
RTC_ShiftSubFS,:	Select the number of Second Fractions to Substitute. This parameter can be one any value from 0 to 0x7FFF.

Return values

An	ErrorStatus enumeration value: SUCCESS: RTC Shift registers are configured ERROR: RTC Shift registers are not configured